❅Last Day Sale - 70% OFF❅ AC Valve Core Quick Remover Installer Tool Set

🔧 10-Second Valve Swap? DONE! 🛠️

Sick of Freon leaks? This Kit FIXES R134A/5V1 Valves in SECONDS!

➤ PRO MECH APPROVED:
✅ DUAL QUICK-COUPLERS → Red (16mm HIGH Pressure) + Blue (13mm LOW Pressure)
✅ BRASS BODY + STEEL ROD → Survived 300+ Cycles! 💪
✅ ZERO LEAK BALL VALVE → 97% Less Freon Loss! ❄️

🌈 YOU’LL BE DONE BEFORE COFFEE BREAK:
Leak test → Yank old core → Pop new core → Pressure check
Save $200+ in shop fees! 💸

Installation Instructions

1. Pull out valve rod to maximum length, close the valve on the tool, connect the quick connector of the tool to the car air conditioner quick connector.
2. After tightening the air conditioner, then open the valve on the tool. Push the stem in and rotate the tail knob.
3. When the valve core is loosened, pull out the lever and close the valve of the product.
4. Unscrew the extremity port, then the valve core is removed.

Feature

• ❅WHAT YOU GET: The R134 AC valve core removal tool is adjustable to fit the different valve core(1pc Red-high pressure R134A Valve Core Quick Remover Installer Tool, 1pc Blue-low pressure R134A Valve Core Quick Remover Installer Tool ). Different style valve cores can meet your different use(10pcs R134A Valve Cores, 10pcs 5V1 Valve Cores). Good for car auto air condition, HVAC Maintenance or repairing.

• ❅HIGH & LOW PRESSURE QUICK COUPLER: R134A Quick Valve Core Remover Installer Tools comes with Red-high pressure coupler (inner diameter 16mm), Blue-low pressure coupler (inner diameter 13mm). The quick coupler inner schrader valve can easily take out the car air conditioning valve core with a head diameter of less than 2.5mm.

• ❅EASY TO USE: 134A Valve Core Quick Remover Installer no additional hardware required. Although the valve rod has very strong suction power and can hold the valve firmly, we recommend you use a dab of grease and gummed the end of the removal rod to insure that the schrader valve stick the valve core during removal. If there was not enough clearance for the cut off valve to close with a core attached to the tool, just slowly unscrew the removal tool back up its threads to get the valve to shut.
• ❅HIGH QUALITY: This valve core quick remover tool is mainly made of copper brass, sturdy and long lasing. The valve rod is made of stainless steel, the red and blue valve is made of aluminum alloy. Perfect design increase hand friction, solve all kinds of valves overpowered problems. The open and close ball valve can prevent R134A loss when you charging.

Package Include:

• 1PC A/C R134A Valve Core Remover/High and Low Pressure
• 1PC Valve Core Remover
• 10PCS R134A Valve Cores
• 10PCS 5V1 Valve Cores